Used Kimer beam 2C 124/4H - 3300 x 124 x 50 mm

Used beam for a stable and efficient pallet racking setup

This used Kimer 2C beam is intended as a horizontal support in a pallet racking system and, together with the uprights, forms the load-bearing surface for pallets and supports. With a length of 3300 mm and a profile size of 124 x 50 mm, this is a practical choice for anyone maintaining or expanding an existing Kimer setup. The beam is supplied including 2 locking pins for secure locking into the frame.

Application in the warehouse

In daily warehouse processes, a reliable beam is essential for safe storage and a tight layout of bays. This beam is used per level to achieve the desired bay width and to quickly replace damaged or missing beams, so capacity and safety are maintained.

Practical for replacement or extension

For B2B buyers working with used and new racking materials, this Kimer beam offers a direct solution for repair, reconfiguration or extension. Thanks to the included locking pins, assembly is efficient and the structure remains stable during intensive use.

Suitable for pallets

With a beam length of 3300 mm, this beam pair accommodates three euro pallets (800 x 1200 mm) or three block pallets (1000 x 1200 mm) side by side. In accordance with NEN-EN 15512, a minimum clearance of 75 mm between pallets is maintained, corresponding to an average maximum pallet width of 1000 mm. As an alternative, a combination of 1 euro pallet and 2 block pallets (three pallets in total) also fits. This size matches bays specifically set up for this type of pallet.