Used Kimer beam 2C 84/4H - 1800 x 84 x 50 mm

Used beam for a stable and safe bay layout in your pallet racking

This used Kimer 2C beam is designed to connect racking frames, creating a support surface for pallets and load carriers in your warehouse. With a length of 1800 mm and a profile of 84 x 50 mm, this is a practical solution when you need to achieve a specific bay size or replace a damaged beam. The beam is supplied including 2 locking pins for correct locking.

Application in the warehouse

In a pallet racking system, beams determine the bay width and provide the supporting structure on which goods are stored. A suitable beam is essential for stability, safe loading, and a neat, organised layout. This Kimer beam is suitable for situations where you need the same type of beam within an existing Kimer setup.

Practical for replacement or extension

In B2B environments where continuity matters, being able to replace parts quickly is important. With this used beam, you choose a cost-efficient component that can be put into use immediately for maintenance, damage repair, or the extension of a Kimer 2C racking configuration, without unnecessary downtime.

Suitable for pallets

With a beam length of 1800 mm, this pair of beams provides space for two euro pallets (800 x 1200 mm) side by side. According to the NEN-EN 15512 standard, a minimum clearance of 75 mm between the pallets is maintained, which corresponds to an average maximum pallet width of 787.5 mm. This length is often chosen for racking bays with a fixed, uniform pallet layout.