Used Kimer beam 2C 124/4H - 3600 x 124 x 50 mm

Robust pallet racking beam for safe bay configuration and load capacity

This used Kimer 2C beam is intended as a horizontal support in a pallet racking system and, together with the uprights, forms a stable beam pair on which pallets or shelves rest. With a length of 3600 mm and a profile height of 124 mm (50 mm thick), this is a practical choice for building or repairing a warehouse racking system. The beam is supplied including 2 locking pins for secure locking.

Application in the warehouse

In daily logistics, the correct beam determines the layout of your racking bays and the reliability of storage. This beam is suitable when you need a bay width of 3600 mm and want to achieve a solid connection with the frame, with the locking pins helping to prevent unintended lifting out during use.

Practical for replacement or extension

Ideal for B2B maintenance, damage repair, or expanding existing Kimer setups with used racking materials. You reduce downtime, keep your racking configuration consistent, and replace in a targeted way with a component that is ready for immediate use.

Suitable for pallets

With a beam length of 3600 mm, this beam pair accommodates four euro pallets (800 x 1200 mm) or three block pallets (1000 x 1200 mm) side by side. In accordance with NEN-EN 15512, a minimum clearance of 75 mm between pallets is maintained, corresponding to an average maximum pallet width of 806.2 mm. This size matches bays specifically configured for this type of pallet.