Nedcon beam CC1304015A - 3600 x 130 x 40

Robust pallet racking beam component for safe load bay capacity and stable storage

This new Nedcon 2C-beam is intended for building up or replacing a load level in pallet racking. With a length of 3600 mm and a profile of 130 x 40 mm, it forms a solid connection between the uprights, allowing pallet positions to be arranged tightly and reliably. The beam is supplied with 2 locking pins, allowing you to properly secure the locking for a safe setup.

Application in the warehouse

In a warehouse environment, the quality of the beams directly determines the stability of the racking bay. This Nedcon beam (type CC1304015A) is used as a horizontal support for pallets and goods and is suitable when repairing an existing bay, adding a level, or resolving damage caused by load or collision. The material thickness of 1.5 mm supports a sturdy, reliable installation.

Practical for replacement or expansion

For B2B purchasing and technical service, this is a practical component for keeping your stock of racking materials complete: a single loose beam with the correct dimensions and the necessary locking pins included. Ideal for quick replacement during maintenance or for efficiently expanding your pallet racking with a matching beam pair in the same version.

Suitable for pallets

With a beam length of 3600 mm, this beam pair provides space for four euro pallets (800 x 1200 mm) or three block pallets (1000 x 1200 mm) side by side. In accordance with NEN-EN 15512, a minimum clearance of 75 mm between pallets is maintained, corresponding to an average maximum pallet width of 806.2 mm. This size matches bays specifically set up for this type of pallet.