Used Esmena beam GNA 11641 - 3600 x 100 x 41 mm

Used beam for stable pallet positions and quick reorganisation

This Esmena 2C beam is a used beam for pallet racking and, together with the uprights, forms a sturdy load-bearing layer for pallets. With a length of 3600 mm and a profile of 100 x 41 mm, this is a common size for warehouse setups where you want to store efficiently without unnecessary downtime. Supplied including 2 locking pins for secure locking in the frame.

Application in the warehouse

In a pallet racking system, the beam determines the bay layout and the practical working height. This beam is used to create or restore levels, for example in case of damage, reconfiguration, or replacing a missing component. The locking pins help prevent unwanted detachment during daily handling.

Practical for replacement or expansion

For B2B, this is a direct solution when you want to maintain or expand Esmena racking material (pre-2014) with used pallet racking components. You keep your racking bay operational with a suitable beam, without having to replace an entire racking section.

Suitable for pallets

With a beam length of 3600 mm, this beam pair fits four euro pallets (800 x 1200 mm) or three block pallets (1000 x 1200 mm) side by side. According to the NEN-EN 15512 standard, a minimum clearance of 75 mm between pallets is maintained, which corresponds to an average maximum pallet width of 806.2 mm. This length is often chosen for racking bays with a fixed, uniform pallet layout.