Used Esmena beam GNA 11641 - 3300 x 100 x 41 mm

Reliable used beam for quickly repairing or expanding your pallet racking

This used Esmena 2C beam is intended as a horizontal support beam in a pallet racking system and, together with the uprights, forms the load-bearing surface for pallets. Thanks to its length of 3300 mm, it is suitable for common bay layouts, while the 100 mm height and 41 mm thickness ensure a sturdy, stable connection. The beam is supplied including 2 locking pins for secure locking in the frame.

Application in the warehouse

You can use this beam to rebuild a bay after damage, adjust levels, or create additional storage positions within an existing Esmena setup. The locking pins help prevent detachment due to vibrations or impacts, increasing operational reliability in busy warehouses.

Practical for replacement or expansion

For B2B buyers, this is an efficient choice when you specifically need an Esmena beam (JH – pre-2014) without replacing an entire section. Ideal as a replacement part or for expansion with used racking materials, while maintaining a consistent structure in your pallet racking.

Suitable for pallets

With a beam length of 3300 mm, this beam pair accommodates three euro pallets (800 x 1200 mm) or three block pallets (1000 x 1200 mm) side by side. In accordance with NEN-EN 15512, a minimum clearance of 75 mm between pallets is maintained, corresponding to an average maximum pallet width of 1000 mm. Alternatively, a combination of 1 euro pallet and 2 block pallets (three pallets in total) also fits. This length is often chosen for racking bays with a fixed, uniform pallet layout.