Used Bito beam PT150S - 3600 x 150 x 50 mm

Reliable used beam for stable support structures in pallet racking

This used Bito tubular beam of type PT150S is intended as a horizontal support between the uprights of a pallet racking system. With a length of 3600 mm and a profile height of 150 mm, it provides the basis for a sturdy shelf or pallet position, where correct locking is essential for safe use. The beam is supplied including 2 locking pins for a neat and direct installation.

Application in the warehouse

In everyday storage environments, the quality of the beam determines the stability of the racking and the reliability of the storage locations. This beam is used to form bays of the desired width and is suitable for situations where you want to restore an existing setup or are looking for an identical beam within a Bito system.

Practical for replacement or expansion

For technical services, warehouse fitters and resellers, this is an efficient choice when speed and continuity matter. Thanks to the included locking pins and the common dimensions (3600 x 150 x 50 mm), this pallet racking part is practical for targeted replacement, without unnecessary adjustments to your racking configuration.

Suitable for pallets

With a beam length of 3600 mm, this beam pair accommodates four euro pallets (800 x 1200 mm) or three block pallets (1000 x 1200 mm) side by side. In accordance with NEN-EN 15512, a minimum clearance of 75 mm between pallets is maintained, corresponding to an average maximum pallet width of 806.2 mm. This length is often chosen for racking bays with a fixed, uniform pallet layout.