Nedcon beam CC1505015A - 3600 x 150 x 50

Reliable 2C-beam as a support beam for pallet racking bays of 3600 mm

This used Nedcon 2C-beam is a sturdy beam for pallet racking and forms the horizontal support beam over which the load in the bay is distributed. With a length of 3600 mm, this component is intended for bays of 3600 mm and is suitable when you want to replace a damaged warehouse beam or make an existing racking bay usable again. The beam has a height of 150 mm and a thickness of 50 mm, with a material thickness of 1.5 mm, and is supplied including 2 locking pins for secure locking.

Application in the warehouse

In a warehouse setup, the right beam determines the stability and support function of the racking bay. This Nedcon beam is mounted between the uprights and supports pallets or carriers within the bay. The included locking pins help prevent detachment due to vibration or impact, which is important during intensive internal transport.

Practical for replacement or expansion

Ideal for B2B buyers and technical departments who need a suitable pallet racking component quickly to limit downtime. By choosing a used original Nedcon beam, you maintain consistency in your racking material and can efficiently repair, expand, or reorganize without unnecessarily replacing entire sections.

Suitable for pallets

With a beam length of 3600 mm, this beam pair accommodates four Euro pallets (800 x 1200 mm) or three block pallets (1000 x 1200 mm) side by side. In accordance with NEN-EN 15512, a minimum clearance of 75 mm between pallets is maintained, corresponding to an average maximum pallet width of 806.2 mm. This measurement corresponds to bays specifically arranged for this type of pallet.