Used Toyota Beam - TPB0486-2900-N

Used pallet racking beam for stable and safe bay loading

This used Toyota beam is a Lightbeam from the TPB 0486 series and forms the load-bearing connection between the uprights of your pallet racking. With a length of 2900 mm and a profile of 60 x 50 mm, this component is suitable for building or repairing storage bays where reliability and continuity matter. The beam is supplied including 2 locking pins for correct locking in the frame.

Application in the warehouse

A beam determines the bay layout and directly contributes to the safety of your storage system. This Toyota Lightbeam is used in pallet racking to support pallets and carriers at the correct height, for example when reorganizing locations or replacing after damage or wear.

Practical for replacement or expansion

For B2B environments where downtime is costly, a used beam offers a fast and cost-conscious solution. Thanks to the included locking pins, you can apply the component directly during maintenance, repair or expansion within a Toyota pallet racking system.

Suitable for pallets

With a beam length of 2900 mm, three euro pallets (800 x 1200 mm) fit side by side on this pair of beams. In accordance with NEN-EN 15512, a minimum clearance of 75 mm between the pallets is maintained, corresponding to an average maximum pallet width of 866.7 mm. As an alternative, a combination of 2 euro pallets and 1 block pallet (three pallets in total) also fits. This size matches bays specifically set up for this type of pallet.