Used Toyota Beam - TPB0436-3100-N

Used beam for a reliable beam connection in Toyota pallet racking

This used Toyota beam from the TPB 0436 series is intended as a horizontal support in a pallet racking system and, together with the uprights, forms the load-bearing surface for pallets. With a length of 3100 mm and a beam height of 160 mm, this is a practical choice for repairing or rebuilding bays where sturdy, even load distribution is required. The beam is supplied including 2 locking pins for secure locking.

Application in the warehouse

In daily logistics and storage operations, the quality of the beam directly determines the stability of the racking. This Toyota beam is used between two uprights and is suitable when you want to maintain an existing Toyota setup or reconfigure a bay. The material thickness of 1.75 mm contributes to a solid construction for professional warehouse use.

Practical for replacement or expansion

For B2B buyers, a used beam is an efficient solution to replace damage or expand storage locations at manageable cost. Thanks to the included locking pins, you can assemble quickly and prevent unwanted dislodging during use, so that your pallet racking components continue to function reliably.

Suitable for pallets

With a beam length of 3100 mm, this pair of beams accommodates three euro pallets (800 x 1200 mm) side by side. In accordance with NEN-EN 15512, a minimum clearance of 75 mm between pallets is maintained, corresponding to an average maximum pallet width of 933.3 mm. Alternatively, a combination of 1 euro pallet and 2 block pallets (three pallets in total) also fits. This length is often chosen for racking bays with a fixed, uniform pallet layout.