Used Toyota Beam - TPB0436/1.5-3300-N

Reliable pallet racking beam for safe bay layout and load capacity

This used Toyota beam is intended for building up or restoring a pallet racking bay where stability and dimensional accuracy are essential. The beam from the TPB series combines a length of 3300 mm with a profile height of 160 mm and a thickness of 50 mm, allowing you to make efficient use of the storage width. Supplied including 2 locking pins for proper securing in the uprights.

Application in the warehouse

In a warehouse, the correct beam determines the bay size and the safe support of pallets. This Toyota beam is used when you want to restore an existing rack after damage, or when you need a bay width of 3300 mm within a Toyota pallet racking system. The material thickness of 1.5 mm is relevant for a strong, consistent connection.

Practical for replacement or expansion

For B2B purchasing, speed and continuity are important: with a used beam, you limit costs without having to go directly to entirely new sections. Ideal as a separate replacement component or as an addition to your stock of racking materials, with Toyota TPB-type designation for recognition during maintenance and conversion.

Suitable for pallets

With a beam length of 3300 mm, this pair of beams accommodates three euro pallets (800 x 1200 mm) or three block pallets (1000 x 1200 mm) side by side. In accordance with NEN-EN 15512, a minimum clearance of 75 mm between the pallets is maintained, corresponding to an average maximum pallet width of 1000 mm. Alternatively, a combination of 1 euro pallet and 2 block pallets (three pallets total) also fits. This length is often chosen for racking bays with a fixed, uniform pallet layout.