Used Toyota Beam - TPB0435/1.5-3100-N

Used beam for stable and safe pallet storage

This used Toyota beam is an essential pallet racking component for connecting uprights and supporting pallets at the desired level. With a length of 3100 mm and a beam height of 145 mm, this type offers a sturdy basis for daily warehouse loads. The beam is supplied including 2 locking pins, so that locking into the frame can be carried out correctly right away.

Application in the warehouse

In a pallet racking system, the beam determines the storage width and the positioning of the pallet levels. This Toyota type TPB 0435/1.5 is suitable when you need a beam with 50 mm thickness and 1.5 mm material thickness, for example when repairing damage or reorganising locations. Locking pins help prevent unwanted disengagement due to vibration or impact.

Practical for replacement or extension

For B2B buyers, this is a practical choice to quickly get existing Toyota racking operational again, without unnecessary downtime. You replace a single beam in a targeted manner and retain the structure and appearance of the current racking, while working cost-consciously with used racking material.

Suitable for pallets

With a beam length of 3100 mm, three Euro pallets (800 x 1200 mm) fit side by side on this pair of beams. According to the NEN-EN 15512 standard, a minimum clearance of 75 mm between the pallets is maintained, which corresponds to an average maximum pallet width of 933.3 mm. Alternatively, a combination of 1 Euro pallet and 2 block pallets (three pallets in total) also fits. This size matches bays specifically set up for this type of pallet.