Used Toyota Beam - TPB0414-2700-N

Used pallet racking beam for a reliable beam connection

This used Toyota beam from the TPB series is intended as a load-bearing component in a pallet racking system and, together with the uprights, forms the basis for a stable storage level. With a length of 2700 mm and a profile height of 140 mm, this is a practical choice for warehouses looking to maintain or extend existing Toyota racking. The beam is supplied with 2 locking pins for secure locking.

Application in the warehouse

A beam carries the load of pallets and ensures the correct bay layout per storage location. This Lightbeam beam (140 x 50 mm, material thickness 1.50 mm) is used when you want to replace a level after damage, create an extra level, or adjust the layout of your racking without renewing an entire rack.

Practical for replacement or extension

For B2B buyers, this is a cost-efficient solution to limit downtime and have parts quickly available. Thanks to the included locking pins, the beam can be installed immediately, so your Toyota pallet racking is operational again quickly.

Suitable for pallets

With a beam length of 2700 mm, three euro pallets (800 x 1200 mm) fit side by side on this beam pair. According to the NEN-EN 15512 standard, a minimum clearance of 75 mm between pallets is maintained, which corresponds to an average maximum pallet width of 800 mm. This size matches bays specifically set up for this type of pallet.