Used Stow beam PNB 0485 - 3600x125x50

Used beam for a safe and stable pallet racking setup

This used Stow Lightbeam beam is intended as a load-bearing beam in a pallet racking system and, together with the frames, forms a sturdy base for storing pallets. With a length of 3600 mm and a profile of 125 x 50 mm, this type is suitable when you want to repair or expand an existing racking section with original Stow components. The beam is supplied with 2 locking pins for a secured, reliable lock.

Application in the warehouse

In practice, you place this beam between two uprights to form a beam pair on which pallets rest. This is a popular solution in case of collision damage, reorganisation of storage locations, or adding extra levels, where consistent dimensions and system components are important for a neat and safe setup.

Practical for replacement or expansion

For technical services and warehouse managers, this used Stow PNB 0485 offers a quick, cost-efficient way to keep racking operational. The material thickness of 1.75 mm and the included locking pins make this component immediately usable for replacement or expansion within Stow pallet racking.

Suitable for pallets

With a beam length of 3600 mm, this beam pair fits four euro pallets (800 x 1200 mm) or three block pallets (1000 x 1200 mm) side by side. In accordance with NEN-EN 15512, a minimum clear spacing of 75 mm between pallets is maintained, corresponding to an average maximum pallet width of 806.2 mm. This length is often chosen for racking bays with a fixed, uniform pallet layout.