Used Stow beam PNB 0485/1.5 - 3300x125x50

Reliable used beam for quick repair of your pallet racking

This used Stow Lightbeam beam is intended as a horizontal support beam in a pallet racking system and forms, together with the uprights, a stable beam pair for pallet storage. With a length of 3300 mm and a profile of 125 x 50 mm, this is a practical solution when you want to replace a damaged or missing beam without changing your warehouse layout. The beam comes with 2 locking pins for correct locking into the frame.

Application in the warehouse

In daily use, beams provide the load-bearing capacity and the correct levels in your racking. This Stow PNB 0485/1.5 is used in Stow pallet racking where a Lightbeam beam is required, for example when repairing collision damage or restoring a location to a safe, workable setup.

Practical for replacement or expansion

For B2B buyers working with used and new racking materials, this is a cost-effective way to keep racking operational. Thanks to the included locking pins, you can install the beam directly and quickly bring the racking section back into use.

Suitable for pallets

With a beam length of 3300 mm, this beam pair fits three euro pallets (800 x 1200 mm) or three block pallets (1000 x 1200 mm) side by side. According to the NEN-EN 15512 standard, a minimum clearance of 75 mm between pallets is maintained, which corresponds to an average maximum pallet width of 1000 mm. Alternatively, a combination of 1 euro pallet and 2 block pallets (three pallets total) also fits. This size matches bays specifically configured for this type of pallet.