Used Stow beam PNB 0485/1.5 - 2200x125x50

Used Stow beam for reliable load capacity and quick installation

This used Stow beam is a practical solution for maintaining or expanding a Stow pallet racking system. It concerns a Lightbeam version (PNB 0485/1.5) with a length of 2200 mm and a profile of 125 x 50 mm, supplied including 2 locking pins for secure locking in the frame.

Application in the warehouse

Beams form the horizontal supports between the uprights and determine the compartment layout of your pallet racking. With this 2200 mm beam you quickly create an extra level or replace a damaged beam, so that storage locations are again correctly load-bearing and can be used in an organized manner.

Practical for replacement or expansion

For B2B, availability and continuity are crucial. A used beam like this helps to limit downtime and adjust a racking configuration efficiently, without unnecessary investments. Thanks to the included locking pins, the set is ready for immediate use during installation.

Suitable for pallets

With a beam length of 2200 mm, this beam pair fits two block pallets (1000 x 1200 mm) side by side. In accordance with NEN-EN 15512, a minimum clearance of 75 mm between the pallets is maintained, corresponding to an average maximum pallet width of 987.5 mm. Alternatively, a combination of 1 euro pallet and 1 block pallet (two pallets in total) also fits. This size matches compartments specifically set up for this type of pallet.