Used Stow beam PNB 0442 - 3600x120x50

Reliable used beam for stable pallet racking bays

This used Stow beam is a load-bearing beam for pallet racking and together with the uprights forms the level on which pallets are safely placed. With type PNB 0442 and a length of 3600 mm, this component is suitable when you want to repair or extend a Stow setup without unnecessary downtime. The beam has a profile of 120 x 50 mm and is supplied with 2 locking pins for secure locking.

Application in the warehouse

In a warehouse, the correct beam determines the layout of bay widths and the stability of the racking bay. This beam is used as a horizontal support between the frames, for example when replacing damaged beams or reconfiguring a storage zone.

Practical for replacement or extension

For B2B buyers, this is a practical choice to quickly keep existing Stow pallet racking operational. Thanks to the included locking pins, installation can take place immediately, reducing the risk of coming loose during daily forklift use.

Suitable for pallets

With a beam length of 3600 mm, this beam pair accommodates four euro pallets (800 x 1200 mm) or three block pallets (1000 x 1200 mm) side by side. According to the NEN-EN 15512 standard, a minimum clearance of 75 mm between pallets is maintained, which corresponds to an average maximum pallet width of 806.2 mm. This measurement corresponds to bays specifically designed for this type of pallet.