Used Stow beam PNB 0436 - 2200x160x50

Reliable used beam for quick repair or expansion of your pallet racking

This used Stow beam is a load-bearing component for pallet racking and provides a stable span between the uprights. The PNB 0436 version with a length of 2200 mm and a profile of 160 x 50 mm is suitable when you want to restore an existing Stow setup or need an extra pair of beams. For secure locking, 2 locking pins are included, so the beam locks firmly into the frame.

Application in the warehouse

In daily logistics, the right beam determines the safety and usability of your racking. This beam supports pallets at level and helps to make bays usable again after damage, reconfiguration, or disassembly. The material thickness of 1.75 mm provides a solid basis for typical warehouse loads within the racking design.

Practical for replacement or expansion

For B2B buyers, this is an efficient solution to limit downtime: you replace one specific component without renewing an entire section. By choosing a used Stow beam, you combine fast delivery and cost control, with the assurance of correct locking thanks to the included locking pins.

Suitable for pallets

With a beam length of 2200 mm, this beam pair accommodates two block pallets (1000 x 1200 mm) side by side. According to the NEN-EN 15512 standard, a minimum clearance of 75 mm between pallets is maintained, which corresponds to an average maximum pallet width of 987.5 mm. Alternatively, a combination of 1 euro pallet and 1 block pallet (two pallets in total) also fits. This length is often chosen for racking bays with a fixed, uniform pallet layout.