Used SLP beam RTS100 - 3900 x 100 x 50 mm

Used beam for a stable and safe pallet racking construction

This used SLP RTS100 beam is intended as a load-bearing element between two uprights and forms the basis for a reliable bay layout in your pallet racking. With a length of 3900 mm and a profile of 100 x 50 mm, this is a practical choice for companies looking to replace or extend racking materials with original SLP components. The beam is supplied including 2 locking pins, so the connection can be securely locked.

Application in the warehouse

Beams determine the width of the racking bay and carry the load of pallets and supports. In daily warehouse processes, correct installation and locking are essential to prevent shifting or coming loose, especially under intensive use with forklift traffic.

Practical for replacement or extension

Useful for damage repair, reconfiguration or supplementing existing SLP bays without unnecessary downtime. Thanks to the included locking pins, this used beam is immediately usable within an SLP pallet racking system.

Suitable for pallets

With a beam length of 3900 mm, this beam pair accommodates four euro pallets (800 x 1200 mm) or three block pallets (1000 x 1200 mm) side by side. In accordance with NEN-EN 15512, a minimum clearance of 75 mm between pallets is maintained, corresponding to an average maximum pallet width of 881.2 mm. This length is often chosen for racking bays with a fixed, uniform pallet layout.