Used Redirack beam Box 2C 9050 - 1800 x 90 x 50 mm

Robust used beam for a stable and safe pallet racking

This used Redirack 2C beam is intended as a load-bearing component within a pallet racking system and, together with the uprights, forms the basis for a reliable shelf and pallet support. With a length of 1800 mm and a profile of 90 x 50 mm, this is a practical choice for replacing a damaged beam or expanding an existing setup. The beam is supplied including 2 locking pins for secure locking.

Application in the warehouse

In day-to-day warehouse use, beams provide the correct span between the frames and determine the layout of storage positions. This Redirack Box 2C beam helps limit deflection, shifting and unwanted detachment, so that goods remain stored in a controlled and orderly manner.

Practical for replacement or expansion

For B2B maintenance, retrofitting or reorganization, a used beam is an efficient solution when continuity and cost control matter. Thanks to the included locking pins, the beam can be mounted directly within a Redirack 2C configuration, without having to source additional parts.

Suitable for pallets

With a beam length of 1800 mm, this beam pair accommodates two euro pallets (800 x 1200 mm) side by side. According to the NEN-EN 15512 standard, a minimum clearance of 75 mm between the pallets is maintained, which corresponds to an average maximum pallet width of 787.5 mm. This length is often chosen for racking bays with a fixed, uniform pallet layout.