Used Redirack beam Box 2C 6050 - 3600 x 60 x 50 mm

Used pallet racking beam for a stable and safe bay layout

This used Redirack 2C beam is intended as a horizontal support beam in a pallet racking system and, together with the uprights, forms the load-bearing level for pallets. The beam is supplied including 2 locking pins, so that the connection with the frame is reliably secured. With a length of 3600 mm and a profile size of 60 x 50 mm, this is a practical choice for anyone looking to maintain an existing setup or restore a level.

Application in the warehouse

A beam determines the width of the bay and directly contributes to the stability of the racking. This Redirack beam is used when replacing damaged beams, reorganizing storage positions, or restoring the original configuration within a Redirack system.

Practical for replacement or extension

For B2B environments where continuity and quick availability are important, a used beam offers an efficient solution. Thanks to the included locking pins, the set is immediately ready for use for service, repair, or extension without unnecessary downtime.

Suitable for pallets

With a beam length of 3600 mm, this pair of beams accommodates four euro pallets (800 x 1200 mm) or three block pallets (1000 x 1200 mm) side by side. According to the NEN-EN 15512 standard, a minimum clearance of 75 mm between pallets is maintained, which corresponds to an average maximum pallet width of 806.2 mm. This length is often chosen for racking bays with a fixed, uniform pallet layout.