Used Redirack beam Box 2C 6050 - 2700 x 60 x 50 mm

Used beam for a stable and safe pallet racking setup

This used Redirack 2C beam is intended for carrying pallet loads in pallet racking and, together with the uprights, forms a solid beam pair. With a length of 2700 mm and a profile size of 60 x 50 mm, this is a practical choice for companies wanting to maintain their racking configuration without unnecessary downtime. The beam is supplied including 2 locking pins for secure locking in the frame.

Application in the warehouse

In daily logistics environments, a reliable beam determines the safety and usability of a racking bay. This Redirack beam is used to create levels for pallet storage and can be applied when replacing damaged beams or reorganizing storage locations, where locking pins help limit loosening due to vibrations or collisions.

Practical for replacement or extension

For B2B buyers, this is an efficient solution when you quickly need a matching part within the same Redirack 2C system. Thanks to the included locking pins and the common length, the beam is immediately usable for repair work, capacity optimization, or keeping your existing pallet racking components uniform.

Suitable for pallets

With a beam length of 2700 mm, three euro pallets (800 x 1200 mm) fit side by side on this beam pair. In accordance with NEN-EN 15512, a minimum clear spacing of 75 mm between pallets is maintained, corresponding to an average maximum pallet width of 800 mm. This size matches bays specifically arranged for this type of pallet.