Used Redirack beam Box 2C 6050 - 1800 x 60 x 50 mm

Reliable used beam for quickly repairing or expanding your pallet racking

This used Redirack 2C beam (Box 2C) is intended as a horizontal load-bearing beam in a pallet racking system and is supplied including 2 locking pins for secure locking in the frame. With a length of 1800 mm and a profile of 60 x 50 mm, this is a practical choice for companies wanting to supplement an existing racking setup with identical parts or replace a damaged beam.

Application in the warehouse

The beam forms the basis for the load-bearing level on which pallets are placed and determines the layout of storage positions. The locking pins secure the connection with the frame, which is important for daily use with forklift traffic and varying loads in the racking.

Practical for replacement or expansion

For maintenance, reconfiguration, or expansion of Redirack 2C setups, this used beam offers a direct and cost-efficient solution. You save time during assembly because the locking is included, and you keep your racking configuration consistent without unnecessary adjustments.

Suitable for pallets

With a beam length of 1800 mm, two euro pallets (800 x 1200 mm) fit side by side on this pair of beams. In accordance with NEN-EN 15512, a minimum clearance of 75 mm between the pallets is maintained, corresponding to an average maximum pallet width of 787.5 mm. This dimension matches bays specifically arranged for this type of pallet.