Used Redirack beam Box 2C 15050 - 3600 x 150 x 50 mm

Used beam for a stable and safe pallet racking bay

This used Redirack 2C beam is intended for carrying pallet loads between two frames in a pallet racking system. With a length of 3600 mm and a profile height of 150 mm (50 mm thick), this is a common solution for building or repairing a racking bay. The beam is supplied including 2 locking pins, so the connection to the uprights is properly secured.

Application in the warehouse

In everyday warehouse environments, beams are essential to the support structure of the racking. This Redirack beam is placed at the desired levels to determine storage heights and to create a robust base for pallets or carriers. The included locking pins help prevent unintentional detachment due to vibration or impact.

Practical for replacement or expansion

Ideal when you want to replace a damaged beam or expand an existing setup with matching used racking material. By choosing a used beam, you quickly have a functional component available for maintenance or reconfiguration, with direct usability thanks to the included locking pins.

Suitable for pallets

With a beam length of 3600 mm, this beam pair accommodates four euro pallets (800 x 1200 mm) or three block pallets (1000 x 1200 mm) side by side. According to the NEN-EN 15512 standard, a minimum clearance of 75 mm between pallets is maintained, which corresponds to an average maximum pallet width of 806.2 mm. This size fits bays specifically set up for this type of pallet.