Used Redirack beam Box 2C 15050 - 1352 x 150 x 50 mm

Reliable beam for a sturdy build-up of your racking bay

This used Redirack beam (Box 2C 15050) is intended to quickly make a pallet racking level stable and usable again, for example when replacing or expanding an existing racking bay. With a length of 1352 mm and a profile size of 150 x 50 mm, it forms a sturdy basis for carrying and positioning pallets within your racking configuration. The 2 included locking pins ensure correct locking into the frame.

Application in the warehouse

In daily logistics, the right beam determines the stability and load capacity of every storage level. This beam is used when building up or repairing racking bays, for example in case of damage repair, reorganisation or adding extra levels within an existing Redirack pallet racking.

Practical for replacement or expansion

For technical services, warehouse fitters and maintenance parties, this is a practical choice when a suitable part is needed quickly. The correct size and locking contribute to a neat, safe installation without surprises afterwards.

Suitable for pallets

With a beam length of 1352 mm, this beam pair accommodates a block pallet (1000 mm) with a load up to 1200 mm wide, or a load of maximum 1200 mm wide (for example a big bag, or a euro pallet/block pallet placed rotated 90 degrees). According to the NEN-EN 15512 standard, a minimum clearance of 75 mm between pallets/loads is maintained, which corresponds to an average maximum width of 1200 mm per pallet.