Used Redirack beam Box 2C 14050 - 3300 x 140 x 50 mm

Robust used beam for quickly repairing or expanding your pallet racking

This used Redirack Box 2C beam is a load-bearing pallet racking component that connects two uprights, creating a stable storage level. With a length of 3300 mm and a profile of 140 x 50 mm, this is a practical choice for warehouses looking to supplement an existing Redirack setup. The beam is supplied including 2 locking pins for secure locking in the frame.

Application in the warehouse

In pallet racking, the beam determines the span and thus the layout of your storage. This Box 2C beam is used to carry pallet loads at the desired level, for example during reorganization, capacity expansion, or replacement of a damaged beam.

Practical for replacement or expansion

For technical departments and buyers, this is a direct solution to limit downtime: a used beam with matching locking pins, intended for quick installation within a Redirack system, without unnecessary modifications.

Suitable for pallets

With a beam length of 3300 mm, this beam pair accommodates three euro pallets (800 x 1200 mm) or three block pallets (1000 x 1200 mm) side by side. According to the NEN-EN 15512 standard, a minimum clearance of 75 mm between pallets is maintained, which corresponds to an average maximum pallet width of 1000 mm. Alternatively, a combination of 1 euro pallet and 2 block pallets (three pallets in total) also fits. This size matches bays specifically arranged for this type of pallet.