Used Redirack beam Box 2C 12050 - 3900 x 120 x 50 mm

Robust pallet racking beam for safe bay layout and load capacity

This used Redirack 2C beam (Box 2C) is a sturdy horizontal beam for pallet racking, designed to support racking bays stably and evenly distribute the load across the uprights. With a length of 3900 mm and a profile of 120 x 50 mm, this is a practical choice for warehouses working with wide bays that require reliable support. The beam is supplied including 2 locking pins for correct locking in the frame.

Application in the warehouse

A beam, together with two frames, forms the load-bearing surface of a pallet racking bay. This version is suitable for setting up or repairing storage positions where safety, dimensional accuracy and quick assembly are important, for example during reorganisation, damage repair or reconfiguring picking and pallet locations.

Practical for replacement or expansion

Ideal when you want to supplement existing Redirack setups or replace a defective beam without unnecessary downtime. Thanks to the included locking pins, your technical staff can install it immediately, keeping the connection in the upright properly secured.

Suitable for pallets

With a beam length of 3900 mm, this beam pair accommodates four euro pallets (800 x 1200 mm) or three block pallets (1000 x 1200 mm) side by side. According to the NEN-EN 15512 standard, a minimum clearance of 75 mm between pallets is maintained, which corresponds to an average maximum pallet width of 881.2 mm. This dimension matches bays specifically configured for this type of pallet.