Used Redirack beam Box 2C 10050 - 2200 x 100 x 50 mm

Used beam for safe and stable pallet racking

This used Redirack 2C beam is intended as a horizontal support between two uprights and forms the basis for a reliable beam pair in your pallet racking. The beam is supplied including 2 locking pins, so you can immediately apply the locking correctly. With a length of 2200 mm and a profile size of 100 x 50 mm, this part is suitable for common racking layouts where load capacity and stability matter.

Application in the warehouse

In a warehouse environment, the correct beam determines the layout of storage bays and the support of pallets. This Redirack beam is used when building up or repairing racking bays, for example after damage or reconfiguration of storage locations. The locking pins help keep the beam in place under daily loading and handling.

Practical for replacement or expansion

For B2B buyers, this is an efficient choice when you want to replace Redirack materials or expand an existing setup with used racking components. You receive a suitable pallet racking part with the required locking, so that assembly and turnaround time in the project remain limited.

Suitable for pallets

With a beam length of 2200 mm, two block pallets (1000 x 1200 mm) fit side by side on this beam pair. According to the NEN-EN 15512 standard, a minimum clearance of 75 mm between the pallets is maintained, which equates to an average maximum pallet width of 987.5 mm. Alternatively, a combination of 1 euro pallet and 1 block pallet (two pallets in total) also fits. This length is often chosen for racking bays with a fixed, uniform pallet layout.