Used Ramada beam T95 - 3300 x 95 x 50 mm

Used beam for stable bay layout and safe pallet storage

This used Ramada T95 beam is a load-bearing beam for pallet racking with which you can build racking bays at the correct width and load level. With a length of 3300 mm and a profile of 95 x 50 mm, this component is suitable for repairing or rebuilding a racking section. The beam is supplied including 2 locking pins, so the connection with the frame can be secured.

Application in the warehouse

In a warehouse, the beam determines the clear span between the uprights and thus the practical layout of your storage locations. In case of damage, renovation or reorganisation, this beam allows you to quickly replace a missing or damaged one and keep the racking line correctly aligned.

Practical for replacement or expansion

For B2B buyers working with used racking materials, this Ramada beam offers an efficient solution to keep existing pallet racking operational, without unnecessary rebuilding. Thanks to the included locking pins, immediate installation is possible, limiting downtime in operations.

Suitable for pallets

With a beam length of 3300 mm, this beam pair accommodates three euro pallets (800 x 1200 mm) or three block pallets (1000 x 1200 mm) side by side. According to the NEN-EN 15512 standard, a minimum clearance of 75 mm between the pallets is maintained, which corresponds to an average maximum pallet width of 1000 mm. Alternatively, a combination of 1 euro pallet and 2 block pallets (three pallets in total) also fits. This size matches bays specifically set up for this type of pallet.