Used Ramada beam T160 - 2200 x 160 x 50 mm

Used beam for a stable and safe pallet racking structure

This used Ramada beam (type T160) is intended as a horizontal support in a pallet racking system and, together with the uprights, forms the load-bearing surface for pallets and storage levels. With a length of 2200 mm and a height of 160 mm, this component is suitable for a robust setup where reliability and reuse are central. The beam is supplied including 2 locking pins for correct locking to the frame.

Application in the warehouse

In practice, the beam is used to achieve racking bays at the desired width and to build up or restore storage levels. Locking pins help secure the connection, which is important given daily forklift traffic and varying loads in the warehouse.

Practical for replacement or expansion

For B2B buyers, this used Ramada beam is an efficient choice when replacing damaged beams or expanding existing racking within the same system, without unnecessary downtime. The thickness of 50 mm contributes to a solid, well-fitting component for your racking parts inventory.

Suitable for pallets

With a beam length of 2200 mm, two block pallets (1000 x 1200 mm) fit side by side on this pair of beams. According to the NEN-EN 15512 standard, a minimum clearance of 75 mm between the pallets is maintained, which corresponds to an average maximum pallet width of 987.5 mm. As an alternative, a combination of 1 euro pallet and 1 block pallet (two pallets in total) also fits. This size matches bays specifically set up for this type of pallet.