Used Ramada beam T146/1.5 - 3600 x 146 x 50 mm

Reliable used beam for stable pallet racking bays

This used Ramada beam is intended for forming a safe and load-bearing bay in your pallet racking. The beam is supplied including 2 locking pins, so the connection with the frame can be properly secured. With a length of 3600 mm and a profile size of 146 x 50 mm, this is a practical choice for replacing a damaged beam or expanding an existing setup.

Application in the warehouse

In warehouses and distribution environments, a beam provides the horizontal span between the uprights and thereby determines the bay layout and storage width. This beam contributes to a tidy, safe and efficient storage of pallets and helps prevent deflection and instability when installed correctly.

Practical for replacement or expansion

For B2B buyers, used racking material is a quick and cost-effective solution for maintenance, damage repair or reconfiguration. Since the locking pins are included, you save time during installation and can immediately continue keeping your pallet racking operational.

Suitable for pallets

With a beam length of 3600 mm, this beam pair accommodates four euro pallets (800 x 1200 mm) or three block pallets (1000 x 1200 mm) side by side. According to the NEN-EN 15512 standard, a minimum clearance of 75 mm between pallets is maintained, which results in an average maximum pallet width of 806.2 mm. This size corresponds to bays specifically set up for this type of pallet.