Used Kimer beam 2C 84/4H - 3900 x 84 x 50 mm

Used beam for a stable and safe pallet racking setup

This used Kimer 2C beam is intended as a load-bearing component in a pallet racking system and, together with the uprights, forms the level on which pallets or supports rest. With a length of 3900 mm and a profile of 84 x 50 mm, this is a practical choice when you want to repair or expand an existing Kimer system. The beam is supplied including 2 locking pins for secure locking in the frame.

Application in the warehouse

In a warehouse environment, the correct beam determines the stability of each storage level. Use this beam when replacing damaged beams or creating extra racking bays, so that your storage capacity and safety remain in order without unnecessary downtime.

Practical for replacement or extension

For B2B buyers, reuse is an efficient solution: quickly available, fitting within the existing structure and focused on continuity. The included locking pins help to secure the beam correctly, which is essential for daily use with forklift traffic.

Suitable for pallets

With a beam length of 3900 mm, this pair of beams provides space for four euro pallets (800 x 1200 mm) or three block pallets (1000 x 1200 mm) side by side. According to the NEN-EN 15512 standard, a minimum clearance of 75 mm between pallets is maintained, which equates to an average maximum pallet width of 881.2 mm. This length is often chosen for racking bays with a fixed, uniform pallet layout.