Used Kimer beam 2C 165/5H - 2200 x 165 x 50 mm

Used beam for a stable and safe pallet racking construction

This used Kimer 2C beam is intended as a horizontal support in a pallet racking system and, together with the uprights, forms the level on which pallets and loads rest. With a length of 2200 mm and a profile height of 165 mm, this is a practical choice for companies specifically looking for replacement racking materials within a Kimer setup. The included 2 locking pins help to correctly lock the beam in place and prevent unwanted detachment.

Application in the warehouse

In the warehouse, a beam is used to build up racking bays or to restore them after damage or reorganisation. This beam, 50 mm thick, is suitable for creating a sturdy storage level, for example in zones with intensive handling or varying loads, where reliable positioning and safety are important.

Practical for replacement or expansion

For B2B buyers, a used beam is an efficient solution for quickly making existing Kimer racking operational again or for realising an expansion without unnecessary downtime. Since locking pins are included, installation can proceed smoothly and the racking structure remains complete.

Suitable for pallets

With a beam length of 2200 mm, this pair of beams provides space for two block pallets (1000 x 1200 mm) side by side. In accordance with NEN-EN 15512, a minimum clearance of 75 mm between the pallets is maintained, corresponding to an average maximum pallet width of 987.5 mm. Alternatively, a combination of 1 euro pallet and 1 block pallet (two pallets in total) also fits. This size matches bays specifically set up for this type of pallet.