Used Kimer beam 2C 155/5H - 2700 x 155 x 50 mm

Reliable used beam for carrying pallet loads in Kimer racking

This used Kimer 2C beam is a load-bearing pallet racking component that connects two uprights, forming the basis for a stable and safe storage level. With a length of 2700 mm and a profile of approximately 155 x 50 mm, this is a practical choice for warehouses where load capacity and dimensional accuracy are important. The beam is supplied including 2 safety locking pins for correct locking into the frame.

Application in the warehouse

In a pallet racking system, the beam determines the width of the bay and supports the pallets directly or in combination with, for example, grids or shelves. This Kimer beam is used when building up or repairing storage levels, where neat alignment and a properly secured connection help prevent movement and detachment.

Practical for replacement or expansion

Ideal when you want to replace a damaged beam or expand an existing Kimer 2C configuration with used racking materials. You retain the desired layout without unnecessary downtime, while the included safety locking pins speed up installation.

Suitable for pallets

With a beam length of 2700 mm, this pair of beams accommodates three Euro pallets (800 x 1200 mm) side by side. In accordance with NEN-EN 15512, a minimum clearance of 75 mm between pallets is maintained, corresponding to an average maximum pallet width of 800 mm. This length is often chosen for racking bays with a fixed, uniform pallet layout.