Used Kimer beam 2C 135/5H - 3600 x 135 x 50 mm

Robust used beam for reliable pallet racking bays

This used Kimer 2C beam is intended as a horizontal load-bearing beam in a pallet racking system and, together with the uprights, forms the foundation of a stable storage bay. With a length of 3600 mm and a profile height of 135 mm, this is a practical choice for warehouses where existing racking needs to be kept neatly intact or where a bay layout is being adjusted. The beam is supplied including 2 locking pins for correct locking to the frame.

Application in the warehouse

In everyday logistics environments, the right beam determines the load-bearing structure and safety of the racking bay. This beam is placed between two frames and is suitable for setting up or repairing pallet positions, where consistent dimensions are important for tight alignment and efficient use of space.

Practical for replacement or expansion

For B2B buyers, this is a direct solution for damage repair or for expansion with used racking materials from Kimer. The included locking pins save assembly time and support safe, neat installation within an existing 2C setup.

Suitable for pallets

With a beam length of 3600 mm, this pair of beams provides space for four euro pallets (800 x 1200 mm) or three block pallets (1000 x 1200 mm) side by side. In accordance with NEN-EN 15512, a minimum clearance of 75 mm between pallets is maintained, corresponding to an average maximum pallet width of 806.2 mm. This length is often chosen for racking bays with a fixed, uniform pallet layout.