Used Kimer beam 2C 135/5H - 2700 x 135 x 50 mm

Robust used beam for safe and stable pallet racking

This used Kimer 2C beam forms the load-bearing connection between the uprights of your pallet racking and creates a solid level for storage. With a length of 2700 mm and a profile height of 135 mm, this is a practical choice for warehouses where reliability and quick deployment are essential. The beam is supplied including 2 locking pins, so you can properly secure the connection.

Application in the warehouse

A beam determines the span and carries the load of pallets and supports on the racking frame. This Kimer beam with a thickness of 50 mm is suitable for building complete racking bays or repairing a damaged level, with locking pins helping to prevent unwanted disconnection under load or in the event of impact.

Practical for replacement or expansion

Ideal when you are specifically looking for Kimer components for maintenance, reorganization, or expansion of existing racking. Thanks to the included locking pins and the standard length, this component is efficient to install and immediately usable in B2B environments where downtime is costly.

Suitable for pallets

With a beam length of 2700 mm, this pair of beams accommodates three euro pallets (800 x 1200 mm) side by side. According to the NEN-EN 15512 standard, a minimum clearance of 75 mm between pallets is maintained, which corresponds to an average maximum pallet width of 800 mm. This length is often chosen for racking bays with a fixed, uniform pallet layout.