Used Kimer beam 2C 124/4H - 2200 x 124 x 50 mm

Reliable used beam for quick reconfiguration of your pallet racking

This used Kimer 2C beam is intended as a horizontal load-bearing beam in a pallet racking system and is supplied including 2 locking pins for secure locking in the frame. With a length of 2200 mm and a height of 124 mm, this beam offers a practical solution for replacing damaged parts or adding extra levels.

Application in the warehouse

In daily use, beams determine the span and carry the load of pallets per beam pair. The 50 mm thickness gives a sturdy impression and helps keep the racking stable and neatly aligned, so that storage locations remain safe and efficient to use.

Practical for replacement or expansion

For technical services, warehouse managers, and racking installers, this used Kimer beam is a direct, cost-effective choice when you want to get back up and running quickly: complete with locking pins and without unnecessary conversion. Ideal for keeping an existing Kimer setup operational with matching pallet racking parts.

Suitable for pallets

With a beam length of 2200 mm, this beam pair provides space for two block pallets (1000 x 1200 mm) side by side. According to the NEN-EN 15512 standard, a minimum clearance of 75 mm between pallets is maintained, which equates to an average maximum pallet width of 987.5 mm. As an alternative, a combination of 1 euro pallet and 1 block pallet (two pallets total) also fits. This length is often chosen for racking bays with a fixed, uniform pallet layout.