Used Kimer beam 2C 104/4H - 3300 x 104 x 50 mm

Used beam for stable and safe pallet racking levels

This used Kimer 2C beam is designed to connect racking frames, forming a support level within a pallet racking system. With a length of 3300 mm, this is a practical solution for repairing or expanding existing setups, where reliability and a proper fit within the system are important. The beam is supplied including 2 locking pins for secure locking.

Application in the warehouse

In a warehouse environment, the quality of the beam directly determines the stability of your storage locations. This Kimer beam, with a height of 104 mm and a thickness of 50 mm, supports the creation of consistent racking bays and helps limit movement or disconnection of the joint through the use of locking pins.

Practical for replacement or expansion

For B2B buyers, this part is ideal when you want to quickly replace a damaged beam or add an extra level without unnecessary downtime. Used, but fully functional as a pallet racking component within a Kimer 2C configuration.

Suitable for pallets

With a beam length of 3300 mm, this pair of beams accommodates three euro pallets (800 x 1200 mm) or three block pallets (1000 x 1200 mm) side by side. According to the NEN-EN 15512 standard, a minimum clearance of 75 mm between pallets is maintained, which corresponds to an average maximum pallet width of 1000 mm. Alternatively, a combination of 1 euro pallet and 2 block pallets (three pallets in total) also fits. This length is often chosen for racking bays with a fixed, uniform pallet layout.