Used Jungheinrich Beam - AUF'B'E'0488-1840-G

Used beam for quick replacement or expansion of your pallet racking

This used Jungheinrich beam of the type AUF'B'E' 0488 is intended as a horizontal load-bearing beam in a pallet racking system, forming, together with the uprights, the level on which pallets are safely stored. With a length of 1840 mm and a profile of 80 x 50 mm, this is a practical choice for warehouses looking to maintain a Jungheinrich racking configuration with matching components. The material thickness of 1.5 mm contributes to a robust construction. Supplied including 2 locking pins for secure locking.

Application in the warehouse

In daily logistics, the right beam determines the stability and load capacity of each storage level. This beam is used when building or repairing racking bays, for example in damage repair, reconfiguration, or adding extra levels within an existing Jungheinrich pallet racking system.

Practical for replacement or expansion

For companies that value continuity, this is an efficient choice for maintenance or refurbishment of existing racking. You replace specifically with the correct Jungheinrich beam and maintain consistent dimensions, so that your racking materials remain uniform and operational.

Suitable for pallets

With a beam length of 1840 mm, this beam pair accommodates two euro pallets (800 x 1200 mm) side by side. According to the NEN-EN 15512 standard, a minimum clearance of 75 mm between pallets is maintained, which corresponds to an average maximum pallet width of 800 mm. This length is often chosen for racking bays with a fixed, uniform pallet layout.