Used Jungheinrich Beam - AUF'B'E'0485-3900-G

Reliable pallet racking beam for secure load-bearing connections

This used Jungheinrich beam from the Lightbeam series is intended as a horizontal load-bearing beam in a pallet racking system, forming a stable bay for pallet storage together with the uprights. With a length of 3900 mm and a profile of 125 x 50 mm, this is a practical solution when you want to replace a damaged beam or extend an existing setup without renewing the entire system. Includes 2 locking pins for correct locking.

Application in the warehouse

In everyday warehouse environments, the quality of the beam directly determines the safety and usability of the racking. This AUF'B'E'0485 beam is used as a load-bearing element between the frames, with the locking pins helping to prevent unintended dislodgement due to vibrations or handling.

Practical for replacement or extension

For B2B buyers who want racking materials available quickly, a used beam is a cost-conscious choice. The material thickness of 1.75 mm and the 50 mm beam thickness make this component suitable for professional reuse within Jungheinrich pallet racking where exactly this type is required.

Suitable for pallets

With a beam length of 3900 mm, this pair of beams accommodates four euro pallets (800 x 1200 mm) or three block pallets (1000 x 1200 mm) side by side. According to the NEN-EN 15512 standard, a minimum clearance of 75 mm between pallets is maintained, which corresponds to an average maximum pallet width of 881.2 mm. This length is often chosen for racking bays with a fixed, uniform pallet layout.