Used Jungheinrich Beam - AUF'B'E'0480-3300-G

Reliable used beam for secure load levels in your pallet racking

This used Jungheinrich beam is intended as a horizontal load-bearing beam within a pallet racking system and, together with the uprights, forms the level on which pallets rest. This is a Lightbeam version with a length of 3300 mm and a profile of 100 x 50 mm, supplied including 2 locking pins for securing to the frame.

Application in the warehouse

In daily logistics, a correct beam is essential for stability and a tight, repeatable storage level. This beam is used for storing pallets at widths where 3300 mm is desired, for example when repairing damage, adjusting levels, or reorganizing aisles.

Practical for replacement or extension

For technical services and warehouse managers, this is a practical choice when you want to quickly replace a Jungheinrich component or extend an existing racking system. Thanks to the included locking pins, you can install it directly and put the level back into safe use.

Suitable for pallets

With a beam length of 3300 mm, this beam pair accommodates three euro pallets (800 x 1200 mm) or three block pallets (1000 x 1200 mm) side by side. According to the NEN-EN 15512 standard, a minimum clearance of 75 mm between pallets is maintained, which corresponds to an average maximum pallet width of 1000 mm. Alternatively, a combination of 1 euro pallet and 2 block pallets (three pallets in total) also fits. This length is often chosen for racking bays with a fixed, uniform pallet layout.