Used Jungheinrich Beam - AUF'B'E'0443/1.5-2900-G

Reliable used beam for quickly repairing your pallet racking

This used Jungheinrich beam is intended for supporting pallets in a warehouse racking system and is a practical choice when you want to replace a damaged crossbeam without immediately renewing an entire racking section. With a length of 2900 mm and a profile of 130 x 50 mm, it forms a sturdy base within your storage setup. The beam is supplied with 2 locking pins for secure locking to the frame.

Application in the warehouse

In pallet racking, beams provide the span between the uprights and determine the beam level position of your storage levels. This component is suitable for situations where continuity in order picking and pallet storage is important, for example in the case of impact damage or when reorganizing an aisle.

Practical for replacement or expansion

For technical services, facility management and warehouse management, this Jungheinrich beam type AUF'B'E'0443/1.5 is an efficient solution to quickly get back up to strength. The material thickness of 1.5 mm and the included locking pins make it immediately usable for maintenance and targeted expansion.

Suitable for pallets

With a beam length of 2900 mm, this pair of beams accommodates three euro pallets (800 x 1200 mm) side by side. According to the NEN-EN 15512 standard, a minimum clearance of 75 mm between pallets is maintained, which corresponds to an average maximum pallet width of 866.7 mm. Alternatively, a combination of 2 euro pallets and 1 block pallet (three pallets total) also fits. This length is often chosen for racking bays with a fixed, uniform pallet layout.