Used Jungheinrich Beam - AUF'B'E'0442-3100-G

Used pallet racking beam for sturdy and safe bay loading

This used Jungheinrich beam is a robust pallet racking component for forming load levels between the uprights. With a length of 3100 mm and a profile size of 120 x 50 mm, it is suitable for building up or repairing a pallet racking configuration where reliability and stability are key. The included locking pins ensure secure locking into the frame.

Application in the warehouse

In daily logistics processes, the beam determines the span and carries the load of pallets and carriers. This beam is used when setting up storage bays, repairing damaged beams, or realigning racking bays within a Jungheinrich system.

Practical for replacement or expansion

For technical service, facility management, and warehouse management, this is a practical choice when you need a used component quickly without unnecessary downtime. The type AUF'B'E' 0442 offers a recognizable basis for targeted replacement, including 2 locking pins for direct installation.

Suitable for pallets

With a beam length of 3100 mm, this pair of beams accommodates three euro pallets (800 x 1200 mm) side by side. In accordance with NEN-EN 15512, a minimum clearance of 75 mm between pallets is maintained, corresponding to an average maximum pallet width of 933.3 mm. Alternatively, a combination of 1 euro pallet and 2 block pallets (three pallets total) also fits. This size matches bays specifically set up for this type of pallet.