Used Jungheinrich Beam - AUF'B'E'0441-1800-G

Used beam for a stable and safe pallet racking setup

This used Jungheinrich beam is intended as a load-bearing horizontal element in a pallet racking system and, together with the frame, forms the basis for a reliable storage level. With a length of 1800 mm and a profile of approximately 110 x 50 mm, this component is suitable for setting up or repairing a racking bay where load capacity and dimensions need to be correct. The beam is supplied including 2 locking pins for proper locking.

Application in the warehouse

In daily use, beams distribute the weight of pallets and goods across the uprights. In case of damage, bending, or reorganisation of storage positions, it is important to be able to quickly replace a suitable beam, so that the racking can be used safely and reliably again.

Practical for replacement or expansion

For B2B buyers and technical services, this is an efficient solution for keeping Jungheinrich racking materials in stock for maintenance or expansion. The included locking pins save assembly time and help keep the beam firmly in place during intensive warehouse use.

Suitable for pallets

With a beam length of 1800 mm, this pair of beams accommodates two euro pallets (800 x 1200 mm) side by side. In accordance with NEN-EN 15512, a minimum clearance of 75 mm between pallets is maintained, corresponding to an average maximum pallet width of 787.5 mm. This length is often chosen for racking bays with a fixed, uniform pallet layout.