Used Jungheinrich Beam - AUF'B'E'0436-2200-G

Reliable used beam for a safe and stable pallet racking

This used Jungheinrich beam is a robust crossbeam for pallet racking, designed to create bays and safely support pallets. With a length of 2200 mm and a profile of 160 x 50 mm, it forms a solid basis for a stable storage solution. The beam is supplied including 2 locking pins, so the connection with the frame can be properly secured.

Application in the warehouse

In a warehouse racking system, the beam directly determines the bay width and the load-bearing structure of the racking bay. This Jungheinrich beam (type AUF'B'E' 0436) is used when building or repairing pallet racking where reliability and operational safety are important. The material thickness of 1.75 mm contributes to a sturdy construction for daily internal transport.

Practical for replacement or expansion

For B2B buyers, this is a practical choice for damage repair, maintenance, or expansion with used racking materials. Thanks to the included locking pins, the beam is immediately ready for use, minimizing downtime so your racking configuration is quickly operational again.

Suitable for pallets

With a beam length of 2200 mm, this beam pair accommodates two block pallets (1000 x 1200 mm) side by side. In accordance with NEN-EN 15512, a minimum clearance of 75 mm between pallets is maintained, corresponding to an average maximum pallet width of 987.5 mm. Alternatively, a combination of 1 euro pallet and 1 block pallet (two pallets in total) also fits. This length is often chosen for racking bays with a fixed, uniform pallet layout.