Used Jungheinrich Beam - AUF'B'E'0436/2-3900-G

Used beam for a stable and safe pallet racking setup

This used Jungheinrich beam is intended as a horizontal support beam in a pallet racking system and, together with the uprights, forms the level on which pallets are stored. With a length of 3900 mm and a profile size of 160 x 50 mm, this is a practical choice for maintaining or repairing existing racking bays. The beam is supplied including 2 locking pins, so the connection with the frame can be properly secured.

Application in the warehouse

In daily use, beams determine the layout and load-bearing structure of your storage: they carry the load and ensure a straight, safe storage level. This Jungheinrich version, type AUF'B'E' 0436/2, is suitable when you want to replace a damaged beam or realize an additional level within the same racking setup.

Practical for replacement or expansion

For B2B buyers, a used beam is a cost-efficient solution to quickly become operational again without unnecessary downtime. The material thickness of 2.0 mm and the included locking pins make this part immediately usable for service, maintenance and inventory optimization.

Suitable for pallets

With a beam length of 3900 mm, this pair of beams provides space for four euro pallets (800 x 1200 mm) or three block pallets (1000 x 1200 mm) side by side. According to the NEN-EN 15512 standard, a minimum clearance of 75 mm between pallets is maintained, which corresponds to an average maximum pallet width of 881.2 mm. This size matches bays specifically arranged for this type of pallet.