Used Jungheinrich Beam - AUF'B'E'0436/2-3300-G

Reliable used beam as a support beam for your pallet racking

This used Jungheinrich beam is a sturdy support beam for pallet racking and, together with frames, forms the basis of a safe storage level. With a length of 3300 mm and a profile of 160 x 50 mm, this component is suitable for creating pallet positions or restoring existing levels in a warehouse layout. The beam is supplied including 2 locking pins, so you can install it directly with correct locking.

Application in the warehouse

Beams carry the load of pallets and determine the bay width within the racking bay. This version (type AUF'B'E' 0436/2) is intended for professional use where stability and continuity are important, for example in damage repair, reorganizing racking, or rebuilding racking rows with Jungheinrich components.

Practical for replacement or extension

For technical departments and warehouse managers, this is a cost-efficient choice to quickly replace a missing or damaged beam. Thanks to the included locking pins and the material thickness of 2.0 mm, you save time during installation and keep your pallet racking components consistent within the existing system.

Suitable for pallets

With a beam length of 3300 mm, this pair of beams accommodates three euro pallets (800 x 1200 mm) or three block pallets (1000 x 1200 mm) side by side. In accordance with NEN-EN 15512, a minimum clearance of 75 mm between pallets is maintained, corresponding to an average maximum pallet width of 1000 mm. Alternatively, a combination of 1 euro pallet and 2 block pallets (three pallets in total) also fits. This size matches bays specifically arranged for this type of pallet.