Used Jungheinrich Beam - AUF'B'E'0436/1.5-2200-G

Used beam for Jungheinrich pallet racking for stable bay construction

This used Jungheinrich beam is intended as a load-bearing beam in a pallet racking system and, together with two beams and frames, forms a safe storage level. It concerns type AUF'B'E' 0436/1.5 with a length of 2200 mm and a beam profile of 160 x 50 mm, supplied including 2 locking pins for securing.

Application in the warehouse

In practice, this beam is used to create pallet positions or to restore existing levels when a beam has become damaged. The height of 160 mm contributes to a robust construction, while the locking pins help prevent unwanted lifting under load or impact.

Practical for replacement or expansion

For B2B environments where continuity is important, this used beam offers an efficient solution for maintenance or expansion within a Jungheinrich racking configuration, without unnecessary downtime. A suitable choice when you want to specifically supplement one level with a 2200 mm beam of reliable, used quality.

Suitable for pallets

With a beam length of 2200 mm, two block pallets (1000 x 1200 mm) fit side by side on this pair of beams. In accordance with NEN-EN 15512, a minimum clearance of 75 mm between the pallets is maintained, corresponding to an average maximum pallet width of 987.5 mm. Alternatively, a combination of 1 euro pallet and 1 block pallet (two pallets total) also fits. This size matches bays specifically set up for this type of pallet.