Used Jungheinrich Beam - AUF'B'E'0435-2200-G

Used beam for quick and safe reorganization of your pallet racking

This used Jungheinrich beam is intended as a horizontal support in a pallet racking system and, together with the uprights, forms the load-bearing level for pallets. With a length of 2200 mm and a beam height of 145 mm, this is a practical choice for replacing a damaged beam or supplementing an existing bay. The material thickness of 1.75 mm contributes to a stable construction within the rack.

Application in the warehouse

In daily use, beams are used to create racking levels at the correct height and distribute the load evenly across the frame. This Jungheinrich AUF'B'E' 0435 beam is supplied including 2 locking pins, so you can secure the beam immediately after installation, helping to prevent unwanted lifting during loading and unloading.

Practical for replacement or expansion

For B2B warehouses, being able to switch quickly is important: with a used beam you reduce costs without unnecessary downtime. Ideal for damage repair, reorganization, or expansion per level, while continuing to work within the Jungheinrich system with the correct dimensions and locking.

Suitable for pallets

With a beam length of 2200 mm, this pair of beams provides space for two block pallets (1000 x 1200 mm) side by side. In accordance with NEN-EN 15512, a minimum clearance of 75 mm between the pallets is maintained, corresponding to an average maximum pallet width of 987.5 mm. Alternatively, a combination of 1 euro pallet and 1 block pallet (two pallets in total) also fits. This size matches bays specifically set up for this type of pallet.