Used Jungheinrich Beam - AUF'B'E'0435/1.5-3900-G

Used pallet racking beam for a stable and safe load-bearing layer

This used Jungheinrich beam is an essential pallet racking component for connecting frames and creating a reliable beam-pair construction for pallet storage. With a length of 3900 mm and a profile height of 145 mm, this type of beam is suitable for wider bays where load capacity and stability matter in practice. The beam is supplied including 2 locking pins, so that locking into the frame can be secured immediately.

Use in the warehouse

In a warehouse environment, the quality of the beams determines the safety of the racking setup. This Jungheinrich beam (type AUF'B'E'0435/1.5) is used when building, repairing or adjusting pallet racking, for example when reorganising storage locations or replacing after damage. The material thickness of 1.5 mm helps maintain shape stability during daily use.

Practical for replacement or expansion

For B2B buyers who want to move quickly on maintenance or expansion, a used beam is a cost-efficient choice without compromising on functionality. Thanks to the included locking pins, you save time during installation and can specifically supplement existing Jungheinrich setups with matching racking materials.

Suitable for pallets

With a beam length of 3900 mm, this beam pair accommodates four euro pallets (800 x 1200 mm) or three block pallets (1000 x 1200 mm) side by side. According to the NEN-EN 15512 standard, a minimum clearance of 75 mm between pallets is maintained, which corresponds to an average maximum pallet width of 881.2 mm. This length is often chosen for racking bays with a fixed, uniform pallet layout.